| 1.00 Problem: Air is not building up in both the guages |
1.10
| Compressor
|
Cylinder
head gasket failure.
|
Overhaul
cylinder head.Also check for any block in pipe lines, hose and ULVTI filter.
Remove blockage, clean filter and refit.
|
1.11
|
Hose,
pipes & fittings
|
Heavy
leak in circuit between compressor delivery and system protection
value inlet.
|
Check
lines & all joints. Rectify & replace hose assy if damaged.
|
1.12
|
Unloader
value with TI (ULVTI)
|
Heavy
leak through top cover & ex-spout. |
Overhaul
assembly.
|
1.13 |
Sensing
reservoir
|
Heavy
leak through weld joints or drain valve.
|
Rectify
weld joint. Replace defective drain valve.
|
1.14 |
Air
Filter |
Heavy
leak through cover. |
Overhaul
assembly. |
1.15
|
System
protection value
|
Heavy
external leak from the value assembly.
|
Overhaul
assembly.
|
