| 7.0
PROBLEM: Vehicle pulling to one side
while applying brakes |
7.1
|
Slack
adjusters (SA)
|
- Worm shaft slipping in slack
adjuster.
- In correct position between
S A and actuator push rod.
|
Overhaul
the defective assy.*
Angle between actuator push rod and slack adjuster should not
be less than 90 degree at brake applied condition. Reset push
rod adjustment evenly and adjust brakes.
|
7.2
|
Brake
chambers and spring brake actuators
|
- Pushrod sticky operation,
diaphragm leak.
- Difference in type (Size)
of actuators between RH and LH brakes.
|
Overhaul
defective assy.* Replace diapharagm / push rod seal
Ensure fitment of correct size in all brakes.
|
7.3
|
Foundation
brakes & vehicle condition
|
- Defect in foundation brakes.
- Uneven loading or defect
in steering linkages and other alignments.
|
Rectify
as per recommendation.
Rectify as per recommendation.
|
